Benno's Figures Forum

Posted by **Kekso** on 16 May 2022, 11:37

zirrian wrote: compulsive collector with attention deficit

You've just described me :xd:

Posted by **zirrian** on 22 May 2022, 15:40

Another Tetrarch - almost ready for the final release. Will print it in 1:48 too because I like the tank and would love to see how it looks a bit bigger.

Posted by **Santi Pérez** on 25 May 2022, 19:52

zirrian wrote:

Some of Medbury's 14th century Scots - I am really astonished by how well the sculpts look and how they came out of the printer. All done in 1:72.

Are you sure they are really 1/72, zirrian? They look much better than many 1/32 figures. :shock:

Santi.

Posted by **zirrian** on 25 May 2022, 20:02

Absolutely

Designed for 28mm, but this is the beauty of 3D printing, they can be shrunk, and from 28 to 20mm, the details come out even better.

Posted by **zirrian** on 06 Jun 2022, 19:29

I suspect that "Zirrian's Recently Printed" would be a better title for this thread, but oh well...

Russian AGL team in 1:72 from Eugene Schmichnik.

Posted by **zirrian** on 16 Jun 2022, 15:29

In today's episode of "haha, 3D printer goes brrrrr" - some Russian truck riders.

Posted by **Peter** on 07 Jul 2022, 13:32

Nice figures!

Posted by **zirrian** on 02 Sep 2022, 20:32

Slowly adding more troops for my Scots...

Posted by **Minuteman** on 03 Sep 2022, 22:52

The detail on these medieval Scots is outstanding!

Posted by **Xantippos** on 04 Sep 2022, 07:45

Wonderful! the detail on these figurines is superb. Absolutely the best quality 3d printing I have ever seen. Undistinguishable from a Games Workshop 1:48 production figure. So, you use a 3d resin printer? does it make very bad smell? I have thought about buying one, but the toxicity of it has kept me out of it, as well as the cost of the liquid resin, that here where I live was quite high a couple of years ago.

The iraqi Mig is also very nice, very realistic!

Posted by **C M Dodson** on 04 Sep 2022, 08:11

Fantastic quality in these prints.

Best wishes,

Chris

Posted by **zirrian** on 05 Sep 2022, 20:39

Thank you very much.

Xantippos wrote:Wonderful! the detail on these figurines is superb. Absolutely the best quality 3d printing I have ever seen. Undistinguishable from a Games Workshop 1:48 production figure. So, you use a 3d resin printer? does it make very bad smell? I have thought about buying one, but the toxicity of it has kept me out of it, as well as the cost of the liquid resin, that here where I live was quite high a couple of years ago.

The iraqi Mig is also very nice, very realistic!

Yes, I use a Phrozen 4k Mini with their Aqua 4k Grey resin. It does not have any noticable smell (at least compared to my first Phrozen green resin that had a strong smell I did not really mind, but others have noticed). I am not sure where you live, here in Hungary a liter is about 60-65€, which is enough for a loooooot of miniatures.

Posted by **zirrian** on 12 Sep 2022, 20:20

Another 3D printed miracle, but this time it's almost ready - an SdKfz 250 from Trenchworx. The original MG was too thin for the rather heroic scale of their infantry (which I brought up to them, it's something 3DBreed did too, the scale of the MGs on the vehicles do not match the infantry's...) so I need to raid my bitsbox for a PSC MG42. Otherwise I'm pretty happy with it, started painting yesterday afternoon, and now only some dust and varnish remains to be done. I am keeping it simple as it's more of a wargaming piece than a display model. It will look good for the table, but would put more effort into it if I wanted to win a competition with it for sure.

Posted by **Peter** on 22 Sep 2022, 20:40

Wonderfull painted half-track! :thumbup:

Posted by **Xantippos** on 27 Sep 2022, 07:13

Tremendous! the future is here indeed

. Thanks for the info, I have read a few reviews, and it seems to some people gives a lot of trouble, for adjusting, calibration. Have you found these issues too?

Posted by **zirrian** on 27 Sep 2022, 18:40

Xantippos wrote:Tremendous! the future is here indeed . Thanks for the info, I have read a few reviews, and it seems to some people gives a lot of trouble, for adjusting, calibration. Have you found these issues too?

With my first printer, yes, but not so much with the Phrozen Mini 4K. I set it up, leveled the buildplate, found a good resin, and been printing pretty much troublefree since.

Posted by **zirrian** on 06 Oct 2022, 21:10

Preparing for a game on Saturday, currently trying to finish up a SU-76 and ~12 infantrymen along with a mortar. So far good progress, once they are all ready...well, that's my other thread is for.

Posted by **zirrian** on 07 Oct 2022, 20:30

Okay, so I managed to actually paint everything, and based them as well...tomorrow we'll see how they fare, and I will bring some photos of the game as well as the models in action

Posted by **Peter** on 07 Oct 2022, 22:13

zirrian wrote:

Okay, so I managed to actually paint everything, and based them as well...tomorrow we'll see how they fare, and I will bring some photos of the game as well as the models in action

Top! Looking forward to that! ;-)

Posted by **Xantippos** on 09 Oct 2022, 15:30

Great! so, does it take very long to print a tank? and can you print more than one soldier at a time?

Benno's Figures Forum

Work in Progress

Zirrian's Work in Progress

Re: Zirrian's Work in Progress

Login

Who is online

Forum Newsletter

Latest posts