Boxing Day,saw me making that which follows.
Plan C is the last Mill Wheel construction, and will be made entirely out of paper card.
For 1/72 or 28mm figures. Or Whatever?
I`ve added the Compass to the tool list on this one.
Make a Square.
To Round,,, to Mid Section Cross...then Corner to Corner. See ? It is very easy.
Mark out where the Spindles will be.
Cutting and popping the pieces out is great fun.
See what i mean? Anything that makes a mess is fun.
This is a Template and as such dimensions have been measured and cut out smaller as allowance has been made for the thickness of the pencil point as it Races,Traces around the entire wheel.
This means only this has to be measured out.
As the lines crossed over one another the Centre is fixed.
From now on all that is required is Tracing,Cutting Out and sticking all the pieces down.
I set into place a three layer laminated structure for each wheel.
The centre hole i`ll cut out later.
They will be tremendously strong when finished.
Scribing,then painting,then dry brushing and construction of all four wheels can finally take place next
There are two Plan C Mill Wheels.
All will be fixed onto a dowel which acts as a Spindle so it will turn on two pivot points.