Work in Progress

1/32-1/35 Mille Miglia 1931

Posted by Challenger77 on 28 Feb 2023, 20:49

Hello M :-D ates a small Update on the SSKL. First i added a bit Plasticcard over the nice Detail on the Gastank, Matchbox made this good, but on the Originalcar there was a Sheetmetal installed. Recreate with Plasticcard the Sheetmetal under the 3 Exhaustpipes in the Bonnet. They must me flush with the Bonnet. The Exhaust was made out of a bit brasstube, slightly bend and on the End pressed Flat.Also added the body piping with thin Aluminiumwire. I rebuild the Mudguardmountings with Brassrod and T Profile. not 100% but way better than Matchbox. Also with Brasstube , 0.9 mm and 1.4 mm created the Headlight Mounting. The lights self are from ELF, not entirly correct but i want to install lights, you know.... :P This was a Pain in the Axx....fiddling Work, last thing Today was the Registrationlighting also Brasstube.
The Lights are once again SMD LED , around 0.5 mm "big".......

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image



Image

ImageImage

Image

Next is the Licebseplate and hopefully all Parts stood where they are, the Airbrush come out ;-)
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50


Posted by dykio on 28 Feb 2023, 21:42

i really really like this topic. model building at its best. Fantastic what you are doing with these model :thumbup: :thumbup: :thumbup:
User avatar
dykio  Netherlands
 
Posts: 1503
Member since:
31 Jan 2008, 19:56

Posted by Santi Pérez on 01 Mar 2023, 20:52

It's always a pleasure to see the progress of your project so thoroughly explained and illustrated, Challenger77. :love:

Santi.
User avatar
Santi Pérez  Spain
 
Posts: 2127
Member since:
28 Aug 2016, 19:42

Posted by Challenger77 on 05 Mar 2023, 16:10

Just another fiddling Pimp Up...the Softtop and Linkage are only rudimentary plasticblobs. So i cut it down, add on each Side 3 small Brasstubes, 0.7 mm flat pressed on one end, and a Small Part U-Profile, with a Pinhead i simulate the Hinge. The remind of the Softtop covered with some Fabrictape to add a bit of Surfacedetai. And then i added 2 Strips of crap Etchframe and etched Buckles.

Image

Image

Image

Image

Image

Image

Image

Image

:-D a bit of refinement and then i hope to get paint on this little Monster....
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Posted by Peter on 05 Mar 2023, 21:10

Nice little monster so far Harry! :thumbup:
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22780
Member since:
25 Mar 2008, 18:51

Posted by sansovino on 09 Mar 2023, 16:36

please more of it .... so much work and creativity!
sansovino  Germany
 
Posts: 794
Member since:
27 Mar 2014, 21:42

Help keep the forum online!
or become a supporting member

Posted by Challenger77 on 09 Mar 2023, 19:45

Hello one more Time :-D First testing the Lights.....Then i added the last Details. The Quickrelease Gascap, pimped the Kitpart with small Copper and Brass Wire/Tube,scratched the Licenseplate and Nationalityplate, Mudguard "Extensions" and the Stoneguard before the Radiator. Not entirly 100% correct, but i think it looks not bad.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Regards from Vienna :wave:
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Posted by JurgenH on 09 Mar 2023, 22:01

You make a great build. You work out the details beautifully. In this way she develops a realistic composition of Dios.
Just fantastic. I admire your eagerness to work. the amount of time you put into this dio is enormous. I wish you a lot of fun building. :yeah: :yeah: :yeah:
JurgenH  Germany
 
Posts: 194
Member since:
01 Aug 2022, 20:28

Posted by Beano Boy on 10 Mar 2023, 10:22

Fantastic Project that is a work of Art! :thumbup: BB
Beano Boy  England
Supporting Member (Gold) Supporting Member (Gold)
 
Posts: 8127
Member since:
03 Sep 2013, 14:45

Posted by Challenger77 on 15 Mar 2023, 16:01

The last Details done, new Toolbox, a "Jerry"can from Miniart, both with Tamiyatape "Belt" and etched Buckles. New Quickreleases for the Fuelfiller and the Sparetires with Copper, Brass and the cutdown Kitparts, and of Course the Figures. These are a Mix of immense Miniatures Feets & Heads, Bodies from Penelope & MRRC,and Arms from the Crapbox. To blend the Codriver in, i use putty from Greenstuff. The belt, Buckle and small handles on the Enginecover i will mounted after Painting.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Funny Fact, not a Single Manafacturer , no Matter if its a Diecast or a Kit, got this well documented Car right. Even the 19.000 € Amalgammodel is Wrong and incomplete, all made too much holes in the frame, wrong or simply not there Details. So i try my best to get as close i can. Some Parts are a Compromise, such as the Tires, with a §D Printer this would be simple, but i don't have one :shock:

Greetings :-D :wave: :-D :wave:
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Posted by Peter on 15 Mar 2023, 18:00

It is nice to see every next step of this project! Wonderfull work Harry! :thumbup:
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22780
Member since:
25 Mar 2008, 18:51

Posted by MABO on 19 Mar 2023, 14:35

I can not find other words than "Amazing Details!"
User avatar
MABO  Europe
Supporting Member (Gold) Supporting Member (Gold)
 
Posts: 9170
Member since:
12 May 2008, 18:01

Posted by Challenger77 on 24 Mar 2023, 14:14

Hello Mates, since the SSKL is still in the Body-and Paintshop :-D i post a Video , how far i gone until now.
Hope you enjoy it a little Bit ;-)

Datei von filehorst.de laden

or on YT

https://youtu.be/MxX0yINpnj8
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Posted by Santi Pérez on 24 Mar 2023, 19:56

Fantastic video, Challenger77. Thanks for sharing. :thumbup:

Santi.
User avatar
Santi Pérez  Spain
 
Posts: 2127
Member since:
28 Aug 2016, 19:42

Posted by C M Dodson on 03 Apr 2023, 08:54

That video is lovely.

You can just image a warm Italian night when the show rolls into town.

The interiors are superb and the atmosphere overall is Bella .

Best wishes,

Chris
C M Dodson  United Kingdom
 
Posts: 2692
Member since:
01 May 2015, 18:48

Posted by Challenger77 on 06 Apr 2023, 11:30

:-D Hello Mates
First Paintcoat is drying, so i added some more tiny Details.

Image

First the Penelope Pitlane Steeringwheel gets a bigger Hub and the 2 levers for ignition and mixture adjustment .

Image

Image

Also added the 3pointed Star on the Pewter Knockoffs

Image

Next was the Rear View Mirror, that is only good visible on the Studio Shots same Car after the Nürburgring Race. The MM Pics are retoched to death or simply bad Quality. Only on one frontshot you can see clearly there was a Mirror.
Here on the mille Miglia

Image

Same car and Driver oon the Nürburgring

Image

Image

Image

Image

Image

And then 2 Carjacks, if I am not wrong, on the Sideboard. On the Photos not really identifiable, i found on ebay a Jack from that era. I think its not far away from the real thing. First Pic show the Real ones vs the Amalgam Model. The later looks a bit odd.....

Image

This is the Ebay One

Image

And my Tryout

Image

Image

Image

Image

Image

Jerrycan and the Hood got etched Buckles and some paint

Image

Image

I hope i got it :-D
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Help keep the forum online!
or become a supporting member

Posted by Peter on 07 Apr 2023, 19:20

I think you nailed it Harry! :thumbup:
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22780
Member since:
25 Mar 2008, 18:51

Posted by Challenger77 on 07 Apr 2023, 19:46

Thx :notworthy:
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Posted by MABO on 09 Apr 2023, 07:46

Peter wrote:I think you nailed it Harry! :thumbup:


I think so, too. :-D
User avatar
MABO  Europe
Supporting Member (Gold) Supporting Member (Gold)
 
Posts: 9170
Member since:
12 May 2008, 18:01

Posted by Challenger77 on 19 May 2023, 09:33

Hello Mates :wink:
here's a little update. Its a very timeconsumpting kit, much more Work as the Alfas and the Bug. And i was on an Oldtimerrally with my Club, i haven't a oldie but a very rare mart Roadster Coupe :P ....So here is at first the "pimped" Exhaust. Added to the Kitpart a Brasstube, sqeeze it Flat on the End to recreate the Fishtailexhaust like the Original. Added 3 Suspensions from Meatbox-Alufoil, painted with different Alclad metals. The Chromed anifolds are painted with Greenstuff Chrome for Brushes, a fantastic Paint !

Image

Image

Image

Image

Next i painted the tank cap also with Greentstuff.

Image

Image

The Radiator get a new Stoneguard out of Eduard Etched Mesh, Evergreen strip, a etched selfadheshive Star and a Roccopart for the Lockbase whre the KitCap fits in.

Image

Image

i sand down the Leather Strap on the Hood and recrate it with 3M Tape ( the same Stuff as Tamiyas, but much cheaper! ) added 4 Etchparts.
Image

Image

Then it was Time to Paint and assemble....still a lot to Work.....

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Some Setailwork and the Hood, the come the fun artt, the Weatherring.... :P :P :P
User avatar
Challenger77  Austria
 
Posts: 293
Member since:
18 May 2010, 12:50

Previous pageNext page

Return to Work in Progress