Work in Progress

Huibs T34 tank project

Posted by huib on 08 Jan 2021, 22:39

On a Dutch modelling forum I am involved in a big Soviet Union project. For this I choose to build a series of different models of T34 tanks in 1/76 and 1/72. Starting with the old Matcbox kit:

TheKit

Image
This Revell kit of the T34 is in fact a re-issue of the old Matchbox kit from 1976. So old stuff, which I always fancy. As often the boxart is quite wrong for what is inside the kit, and the text Modell 1940 is equally wrong. But never mind, I did my research and will make a lot of changes to the kit anyway.

And of course, what I liked as a kid very much about the Matchbox kits, whas the small diorama that is included.

Image
Contrary to the original Matchbox release, the Revell re-issue is in one colour of plastic, a dark green.

Image
The other sprue, including the diorama base.

Image
The rubber band tracks have ugly extractor marks, which will be difficult to remove. And the decal sheet is rubbish. These markings are for later tanks. Most early T34's had no tactical markings at all.

Well, let's start.
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57


Posted by huib on 08 Jan 2021, 22:44

Headstart

Made a start immediately to try out the following idea:

Image
The upper hull of the kit. Not bad, but can be enlivened a bit.

Image
Made a start drilling out the ventilation grill on the engine deck.

Image
After a bit of filing and cleaning up I prepared a piece of alu mesh (intended as fence for model railroads).

Image
And glued the mesh in the grill.

Now on with the rest of the hull.
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57

Posted by Bluefalchion on 09 Jan 2021, 00:45

There are few greater pleasures in life than watching huib turn a crummy mass-produced plastic model into a museum quality work of art. Say on!
User avatar
Bluefalchion  United States of America
 
Posts: 3575
Member since:
23 Dec 2010, 07:57

Posted by Wiking on 09 Jan 2021, 01:22

Good start.
Now the engine can breath.
And the option to use effective a molotov coctail are now so much higher.
:mrgreen:

You build the model but I am frighten for the rubber bands.
Optimist call that pices for real, as tracks.
:yeah:
User avatar
Wiking  Germany
 
Posts: 2825
Member since:
14 Sep 2015, 10:03

Posted by huib on 09 Jan 2021, 15:20

Thank you, guys!

Hull

After my experiment using the mesh succeeded, I continued working on the hull.

Image
First I removed some detail, filled some holes and sanded everything smooth to create a tabula rasa for changing this T34 from a Model 1942 into a Model 1941.

Image
The lower hull parts. Revell tried to erase the Matchbox origin from the kit, but with a little effort it's still readable. Some ejector pin marks around the suspension have to be removed.

Image
The hull after adding detail:
- Drivers hatch and optics replaced by an earlier type.
- Ealier model towing eyes
- Two headlights on the glacis instead of one headlight on the hullside (the filled gap of the original position is clearly visible on the photo.)
- Four long range fuel tanks on the hull sides.
- Antenna mount on the left front hullside
- Peephole and rivets on the machingun cover, and the barrel drilled out.
- Fenders thinned down on the front.

Image
And from behind:
- handgrips from iron wire on the engine cover and the differential cover.
- new exhaust pipes
- thinner mudguards on the back
- spare track links on the fenders

Now to continue with the turret.
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57

Posted by Wiking on 09 Jan 2021, 16:20

Wow ! Very fast build huib.
User avatar
Wiking  Germany
 
Posts: 2825
Member since:
14 Sep 2015, 10:03

Help keep the forum online!
or become a supporting member

Posted by Bluefalchion on 10 Jan 2021, 23:00

If you were going to model smoke emanating from the exhaust pipes, what technique would you use?
User avatar
Bluefalchion  United States of America
 
Posts: 3575
Member since:
23 Dec 2010, 07:57

Posted by GumSmith on 11 Jan 2021, 15:40

Hi huib,
another interesting project with lots of nice details. Will follow it.

cheers Oke
GumSmith  Germany
 
Posts: 376
Member since:
09 Apr 2009, 16:38

Posted by Peter on 12 Jan 2021, 13:05

Another great project Huib. :thumbup:

And you are lucky you have the decals. I bought two of them and of both the decals were missing. And when I contacted revell they said that they were no longer availeble. :(
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22507
Member since:
25 Mar 2008, 18:51

Posted by huib on 12 Jan 2021, 16:24

Thank you, guys!

Bluefalchion wrote:If you were going to model smoke emanating from the exhaust pipes, what technique would you use?

I will use some artists pastel chalk on this model below the exhausts.


Peter wrote:And you are lucky you have the decals. I bought two of them and of both the decals were missing. And when I contacted revell they said that they were no longer availeble. :(

And I will not use my decals! :oops:
They are not correct for a model 1941 and in yellow instead of white.
Do you want to have mine?
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57

Posted by huib on 12 Jan 2021, 16:40

Turret

To continue with the turret:

Image
These are all the kitparts involved.

Image
As I want to open the huge turrethatch, the interior needs a bit of work. Luckily the T34 turret was not very busy from the inside.
- Detailed the inside of the hatch
- Built the breech of the gun
- Added vision slots and pistol ports on the inside
- Added some detail to the gun mantlet
- Drilled out the barrel.

Image
Than the interior was painted and weathered. As the turretfloor is closed with this kit I simulated the turret ring by painting a black disc. After adding some crew that should be sufficient, I hope.

Image
The turretparts glued together. Some filler was needed around the seam.

Image
Made a scribing template from a piece of plastic card, to scribe the weldlines in the turret.

Image
The turret fully detailed:
- Corrected the profile of the turret front a bit
- Scribed the welding lines
- Added welded on plates to the turret ring
- Melted in vision slots with a heated srewdriver
- Added the plugs to the pistol ports
- Added three lifting eyes from 0,3mm iron wire
- Replaced the periscope after it broke off in the process
- Filled the hole for the machinegun in the turret roof.
- Drilled three holes in the gun mantlet for the optics and the machinegun.

Image
Picture from behind. The hatch is temporarily fixed with a blob of Blue Tac

Image
The turret on the hul for a general impression.

Now on with the wheels.
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57

Posted by Wiking on 12 Jan 2021, 21:32

A lot of white pieces on dark green.

huib wrote:
Now on with the wheels.

Let me guess you make round ones ?
:-D
User avatar
Wiking  Germany
 
Posts: 2825
Member since:
14 Sep 2015, 10:03

Posted by C M Dodson on 12 Jan 2021, 22:20

Super stuff as always.

Best wishes,

Chris
C M Dodson  United Kingdom
 
Posts: 2568
Member since:
01 May 2015, 18:48

Posted by Peter on 13 Jan 2021, 18:03

What I really like is your eye for details! What you make of a simple plastic kit is just wonderfull! :thumbup:

PS: Yes I can use those decals, but when it is to much trouble it is no problem.
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22507
Member since:
25 Mar 2008, 18:51

Posted by huib on 15 Jan 2021, 13:02

Thank you very much, guys!

Something overlooked

I was looking at some pictures and other reference material, when I discovered I overlooked something.

Image
The access hatch for the differential of this model T34 shouldn't be round but rectangular. :drool:
OK, let's do it.

Image
Removed the handrail and sanded the hatch flat. (Sorry for the blurry pic)

Image
Scratched a new hatch.

Now really on with the wheels!
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57

Posted by Peter on 15 Jan 2021, 14:57

Good observation Huib! :thumbup:
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22507
Member since:
25 Mar 2008, 18:51

Help keep the forum online!
or become a supporting member

Posted by huib on 19 Jan 2021, 12:30

Thank you, Peter.

Wheels

Image
Lot's of wheels for a small tank. I was looking at these roadwheels....Ugly :xd:
Indeed I read in several reviews that these road wheels are amongst the worst parts of this kit.

Image
Now I also read that the old Fujimi kit of the T34-76a, also in scale 1/76, has very decent wheels that can be used on both sides. That offers some opportunities! Moreover as it wasn't difficult to obtain that old kit. (This T34 project is running out of hand already :drool: )
Here you see a Matchbox wheel next to a Fujimi wheel. The Fujimi wheel is much more realistic.

Image
So, what have I done: the front of the roadwheels is Fujimi, the back and the hub are Matchbox. This way I can improve the Matchbox kit and still retain the Fujimi kit buildable.

Image
Ready for paint!
User avatar
huib  Netherlands
 
Posts: 962
Member since:
12 Dec 2015, 15:57

Posted by Peter on 19 Jan 2021, 13:22

So in fact you are making one tank with two kits. Sounds to me that your sparebox is growing again. ;-)

Now the most interesting part is coming, the paintwork! Always curious how someone can paint a model from almost nothing to an excellent painted model with all details. :thumbup:
User avatar
Peter  Belgium

Moderator Moderator
 
Posts: 22507
Member since:
25 Mar 2008, 18:51

Posted by Bluefalchion on 19 Jan 2021, 15:51

Well actually he swapped out part of the wheels so that he can still make both kits. Which is a practice I wholeheartedly approve of.
User avatar
Bluefalchion  United States of America
 
Posts: 3575
Member since:
23 Dec 2010, 07:57

Posted by Wiking on 19 Jan 2021, 16:52

So far so good.
Painting will be also more or less easy.
:yeah:

But the RUBBER BAND (I remember that Revell use a softer rubber) is waiting for you... wish you all the luck you need for this operation.
User avatar
Wiking  Germany
 
Posts: 2825
Member since:
14 Sep 2015, 10:03

Next page

Return to Work in Progress